logo

Mtl- stock

Share on facebook
Share on twitter

Wicking Tutorial | Avoid leaks, burnt flavour & flooding | Tips on how to choose your first MTL RTA.

2 066 views | 7 Oct. 2020

Wicking correctly makes

Wicking correctly makes the whole difference between enjoyable & flavourful vape to a flooding, leaking & dull or burnt flavour nightmare. In this video I will try to address this crucial issue in detail.

Also many vapers who want to upgrade from MTL stock coil to a MTL RTA ask me what to buy, or for vapers who already use a MTL RTA, the most common question is, which RTA is better X or Y or maybe Z!! So in the video I would try and guide you with a few simple clues on how to choose your first or next MTL RTA, so when you do finally decide you would be happy with your purchase and not feel you wasted your heard earned money on something you’re not fully happy with. I hope these topics are beneficial.

Please feel free to comment on your preferences, methods & chosen MTL RTA.

Hiro Soki

Great tutorial! Thanks for putting this on ?

Pete Carlson

Nice review/tutorial! I've been rebuilding for some time now, but still picked up a couple of good pointers.

RolandArthur

Nice video. I´ve been rebuilding my RTA for years now, nice to see all the progress that has been made. Ordered an Ares 2 today, it seems an upgrade is in place. Still like my old Smok though.

Jordi Dunn

Thank you for taking the time and effort in making this video-
I’m sure this will help a lot of fellow vapers and especially those that are transitioning from premade disposable coils to the rebuildable types.--

Ronald Baker

Bin rebuilding for 5years or so mainly mtl and nets still make the odd mistake .
Well explained and should be of help to most newbies.
Well done keep up the good work

Losloco

Camera and distance sucks ass

caveman lovesmoke

Fantastic and comprehensive video that really helps ! Thank you very much for this - u really know ur stuff ?

hansformat

Super video. You just helped a lot of frustrated folks get it right.

Pilgrim Vapes

An excellent video mate. Great introduction to the perils and pleasures of MTL vaping! ????

Adrian Mason

The thinner side of wicking is often just from rolling to a point for feeding through the coil, even the coil it's self can remove some cotton. I find fluffing the pointed end after trim makes them almost even.

Well instructed.

Haar needs cotton to be long to press against the top juice inlets, done right the "wells" should remain dryish.

Emad Elhaddad

How about wicking pioneer, I face leaking issues all the way with complex coils

john nash

Hi NET Vaper thank you for all the info great help.Thank you again i realy in joy the the tutorial

Babar Gillani

Great great Video for new and old vApors u always make Quality contant

Isaac

Hi NET , thanks great tutorial how do all step by step , one question if do a setup and not use the tank for any reason how many time can do alone before do setup again , thanks

hnr razr

Brunhilde will be my first mtl tank. I usually change cotton every 1 or 2 days. Brunhilde looks like easier to wick n not to expensive.

Diana

Hello from Romania.Great tutorial.

Mtl- stock

Share on facebook
Share on twitter

Mechel PAO - MTL Stock Chart Technical Analysis for 01-06-2020

545 views | 6 Jan. 2020

Mechel PAO - MTL Stock

Mechel PAO - MTL Stock Chart Technical Analysis for 01-06-2020

Subscribe to My MAIN Channel Here: https://www.youtube.com/claytrader/

Free Webinar - How I transformed myself from an employee to my own boss, and how you can too!: https://claytrader.com/1-hour-trader-transformation/?utm_source=social&utm_medium=youtube&utm_campaign=chart

Learn how to read stock charts and identify technical patterns as ClayTrader does a quick stock chart review on Mechel PAO (MTL). Watch more MTL Technical Analysis Videos: https://claytrader.com/stock_chart/MTL/

The Stock Trading Reality Podcast - https://claytrader.com/podcast/

ClayTrader.com and its employees are not a Registered Investment Advisor, Broker Dealer or a member of any association for other research providers in any jurisdiction whatsoever and we are not qualified to give financial advice. Investing/trading in securities is highly speculative and carries an extremely high degree of risk.

ElPuertorriqueñoGamer

I bought this stock today i'm -25%

ElPuertorriqueñoGamer

The 1/2 preferred stock

Mtl- stock

Share on facebook
Share on twitter

AugVape Intake MTL - The Mike Vapes Intake hits the MTL market

7 873 views | 27 Nov. 2020

The AugVape Intake MTL is

The AugVape Intake MTL is the Intake brand entry into the growing MTL market for rebuildable tank attys in 2020. With all the recognisable features of the Intake line of tanks, the airflow and deck has been overhauled for a MTL style of vape, the question is...does it work?

═╣ SUPPORT THE CHANNEL ╠═

https://www.patreon.com/vapingwithvic

https://www.youtube.com/vapingwithvic/join

https://www.subscribestar.com/vaping-with-vic

═╣ AugVape Intake MTL ╠═

00:00 ◄ Intro and specs

01:59 ◄ Close up and build

12:58 ◄ Vape

15:35 ◄ Thoughts

═╣ SOCIAL MEDIA ╠═

Site ► http://www.vapingwithvic.co.uk

Facebook Page ► https://www.facebook.com/VapingWithVic

Facebook Group ► https://www.facebook.com/groups/VapingVic

Instagram ► https://www.instagram.com/vapingvic

Twitter ► https://twitter.com/vapingwithvic

LinkedIn ► https://www.linkedin.com/in/vapingvic/

Pinterest ► https://www.pinterest.co.uk/vapingwithvic/

Questions about vaping or general inquiries? Contact me at [email protected]

As always with a Vaping With Vic review, you know that I have tested this item for at least a week, instead of reviewing it the day after it comes in...this channel always tests items first before reviewing.

Luís Bita

Best Regards Vic ??

Lemonade1947

Feel bad for the loose strands didn't make it :(

Nick Mcminn

To get direct lung take out air flow insert and open up airflow

João Pedro Tomaz

??? Bitcoin price is now trading at nearly $3,000 less than the high set earlier in the week, just shy of setting a new all-time record for the cryptocurrency. After a few strong attempts by bulls to get back above $17,000, bears might have flipped the zone into strong resistance, and are now making a stand to break what’s left of support. but the picture is not clear for now I advise investors and newbies is to multiply the little they have and earn more trading with Dr Manuel Rosales strategies, an expert & prominent trader who’s helping investors and newbies accumulate more bitcoin through his amazing trading signals, with his program I was able to earn *12btc trading with *4btc in 2 weeks with this same Manuel’s strategy reach him on ( Telegram: Tradecrypto42 via Whatsapp +1 626 489 4953 ) for more info on how his trading program works and thank me later ??

Meemo M

Waiting for u to design an mtl tank or rda

TaxiJim 71

Why the reverse thread on the screws? I'm thinking there must be a logical reason but I can't see it and it feels counter intuitive unscrewing to tighten.

Simon B

Vic i am guessing you have not vaped this tank much. I think had you have done so you would have realised that the gurgling is an added feature of this tank! I have had my Intake MTL tank for a good few weeks now and i can safely say that the gurgling is a due to the way this tank is designed. Those two intakes.. juice or maybe condensation gets caught up under them (under the deck) causing the gurgle. I have tried allsorts to stop it but to no avail. Now if it happens i blow down through the drip tip holding the tank on it's side to blow the dribble of juice out the AFC.

This is something i can live with though as it simply never leaks, it is easy to wick and other than the slight gurgle has never let me down. One other point is that i wick this tank very differently, this tank allows you to put the cotton through the holes and touch the bottom of the deck, and it works great. never like that dam method as if you drop the tank you can end up pissing out juice. Filling the holes is the way to go. :D

Thanks for the vid though ;)

MattzuFF

Vic is simply THE best vape presenter. He presents all the information, provides context, and then does meaningful comparisons. All while being entertaining. Thanks again Vic!

Living hintz

Optimistically find your preferred MTL from the wide spectrum of options, pesimistically call out for help if not found.

00HiGhGuY00

This RTA (no insert, AFC ring fully open) vs. ammit MTL (AFC ring fully open) which one has more airflow???

Fifencjusz

Well maybe you would be able to get direct to lung hit if you unscrewed the airflow insert. Btw the inserts are weeeeeery familiar to those in the oooold Merlin mini (2016)??

Sean Keeley

I’ve had this tank for two weeks now and I bloody love it... I got one of the first release with the clear orings (that’s fine as it’s a silver tank) I must say, In my opinion, my favourite mtl tank this year!!

CountryBoy Vapes

I'd like to know what are the specs of that MTL Alien Vic was using and who makes it!

Raspa Was

Agreed on the MTL best of. Been a good year for us! I've got my best of done, pretty much. Ether, Pioneer, Ares 2, Pandora, Artemis, and Intake.

Nice one Vic

Chris Neil

So I almost pulled the trigger on Pioneer tank and I just watched this.....any thoughts on which is the better purchase?

Андрей Викторович

Этот атом конструктивно убог, не вздумайте его купить. Обдув через жиклёры не работает, потому что нет герметичности в пластиковом кольце, что находится вверху купола.

Michael Card

18 mg Salt wouldve been smooth as glass lol..Great vid Merry Christmas..Hows that flavor? Tobacco kinda hard to tell..love to see the reg Ejuice flavs to get an idea on flavor

Anthony Bagala

When it comes to MTL tanks I always look out for your videos Vic. Looking forward to your best of 2020 video! I rely on it every year to get an idea of what was the best device in each category. Also, I have put in a substantial order with Juice Cabins on the strength of the praise you give Les Pickin's NETs.

Mike Vapes

Thank you very much for the review Vic!

Ell Leigh

The Ether for me is the best looking mtl rta, how does this compare in performance though?

abdalla adel

Vic where is the review for Ares Mtl v2 this is need to be done also before December

Michael Card

My favs are the intake, Bezerker v2 n Kayfuns..Thanks brother

yoda yoda

i been waiting for this rta to cross your path.i saw it on mike vapes channel and it looked like a pretty good tank to me

Benjamin

I bought one of these from Mikes site after it came in stock and its pretty great. I pick this one up quite frequently over most of my others.

Dragan Miletic

I have all intakes the single and dual and somehow they suit me well ,once figured the wicking, they are in đy daily use for over year now. So i had to get this one as well.
I apsolutely love it. It does not leak it has great flavour compared to ether or expromizer, on the lvl of the siren2. You wick it in the same way as the other Intakes.

The biggest con is the counter screwing, it drives me crazy after all these years why did they have to change ot